SANTI
Dry Suit - ESpace

Dry suit Enduro Space (ESpace) is made of light and extremely durable fabric Nylon/Butylen/Poliester, density of 350gr/sqm. It is cut in a way that makes it easy to adjust to any figure and does not limit movements in any direction.

Telescoping torso stretches up to 30 cm and gives you great mobility, regardless of the thickness of an Undersuit.


Dry Suits ESpace

Our Dry Suits are guaranteed for 3 years!

Details
  • total weight: 4 kg
  • fabric: Nylon/Butylen/Poliester 350gr/sqm
  • colors: black and black/red
  • telescoping torso
  • front zip covered with a flap
  • Apeks valves with "inflator" ending
  • two pockets on thighs
  • neck seal made of insulated latex or 3 mm neoprene
  • HD bottleshape wrist seals
  • 7 mm Neoprene boots
  • suspenders
  • 7 mm Neoprene hood
  • medium pressure hose
  • bag
  • 3year guarantee
  • guarantee service in 5 working days

We sewn the sleeves to this dry suit in a way, that when you lie a dry suit flat it is Y-shaped not T-shaped, which guaranties you freedom of movements, e.g. when you operate the valves. When we were developing the cut of sleeves and trouser-legs we eliminated cross-seams, which are unpopular among most divers. Two big pockets, the front zip covered by a special flap and the fact that it can be made-to-measure make this dry suit exceptionally comfortable and perfectly made for the divers, who know what they want.

Optimal position of the valve

Dry Suit - ESpace

Telescoping torso put in a way shown on the picture. Firstly pull up the trousers as high as you can. Then pull down the upper part of the dry suit, so it reaches upper edge of the pocket. Lastly fasten the crotch clip, which holds everything together.

In this model pockets differ from one another in few details. The right pocket has a "wet note" part and 2 smaller D-rings, so you can attach a dive float and a notebook on different D-rings. Thanks to this solution you can detach some elements without detaching the others.

The left pocket has 1 bigger D-ring. If you do not tolerate metal D-rings you can use metal holes we prepared to place there rubber rings.
Both pockets have bulges on flaps, so you can easily fasten and unfasten pockets even when you are wearing thick gloves.

The flap covering the front zip is a very simple and effective solution. It covers the zip instantly after you fasten the zip.
It works extremely well and never fails.



Neoprene insulation of the latex neck seal Neoprene neck seal Neoprene neck seal ideally works with our hood, creating a waterproof connection.

Trouser-legs are cut in a way that eliminates cross-stitches in crotch.

Inside suspenders with practical pocket for keys

Outer layer of the dry suit made of Nylon is very resistant to bursts and abrasion. It dries easily and has an advantage of not getting dirty easily, so it can be used in quite dirty water.

Boots  
Neoprene Socks
Rockboots
Flex Sole
Standard Neoprene Shoes
Hoods  
Standard
Collar
For Fullface Mask
Colors